What is the best time of year to pour concrete in Roosevelt County?

Late May through September offers the most reliable conditions. With 7,498 heating degree-days annually (more than double the national median), Roosevelt County experiences extended cold periods that can damage curing concrete. Temperatures need to stay above 50°F for at least 7 days after pouring for proper strength development.

How much does a concrete driveway cost in Roosevelt County?

A standard 400 sq ft concrete driveway costs between $3,500 and $6,500, with $4,800 being typical. This reflects national average pricing since local cement mason wages ($28.33/hr) align with national rates. Stamped or colored finishes push costs toward the higher end.

Why does winter weather matter for concrete projects?

Roosevelt County scores 90.77 out of 100 on FEMA's winter weather risk index, placing it in the Relatively High category. Freeze-thaw cycles cause concrete to crack and spall if not properly mixed with air entrainment and sealed after curing. Contractors should specify 4,000+ PSI concrete mixes designed for cold climates.

How much should I budget for a concrete patio?

A 400 sq ft patio slab costs $3,000 to $6,000 in Roosevelt County, with an average around $4,200. Add $200-$600 for a quality sealer application to protect against moisture penetration during the county's harsh winters with 37 inches of annual snowfall.

Do local labor costs affect concrete pricing here?

Roosevelt County's concrete costs match national averages because local cement mason wages ($28.33/hr) equal the national mean. The services adjustment factor is 1x, meaning neither labor premiums nor discounts significantly affect your final price compared to other regions.

Is radiant heating worth adding to a concrete slab?

In Roosevelt County's heating-dominated climate with 7,498 HDD annually, radiant floor heating adds $6-$10 per sq ft but provides meaningful comfort benefits in garages and workshops. At $0.133/kWh electricity rates, operating costs remain reasonable, and the system can offset heating expenses over time.

How can I finance a larger concrete project?

With median home values at $119,400 and current mortgage rates at 6.36%, home equity financing works well for projects exceeding $5,000. A $4,800 driveway represents about 4% of median home value. Many contractors also offer 3-6 month payment plans for qualified customers.

REGIONAL COST GUIDE · Roosevelt County, MT

How Much Does Concrete Work Cost in Roosevelt County, MT?

Concrete driveways in Roosevelt County, MT cost $3,500-$6,500 on average. Get local pricing for patios, sidewalks, and slabs with 2026 data.

Cost range $3,500 – $6,500

Average $4,800

Updated May 17, 2026

Compare Free Concrete Quotes

COST BREAKDOWN

What homeowners in Roosevelt County actually pay.

Local market ranges built from regional labor, materials, and permitting data — not national averages.

Concrete Driveway (400 sq ft)

$3,500 Avg: $4,800 $6,500

Patio Slab (400 sq ft)

$3,000 Avg: $4,200 $6,000

Sidewalk Section (50 linear ft)

$800 Avg: $1,200 $1,800

National avg $4,800 × 1x local adjustment = $4,800

Why Roosevelt County prices look like this.

Timing your concrete project in Roosevelt County requires careful planning around the region's harsh winters. With 7,498 heating degree-days annually (more than double the national median of 3,700), the reliable pouring season runs from late May through September. Concrete needs consistent temperatures above 50°F for proper curing, making spring and summer the optimal window. A 400 sq ft driveway runs $3,500 to $6,500 in this area, while patio slabs of similar size cost $3,000 to $6,000. For sidewalk repairs or additions, expect $800 to $1,800 per 50 linear feet. These prices reflect Roosevelt County's alignment with national labor costs, as cement masons here earn wages comparable to the $28.33/hr national average. Material delivery to this rural, non-metro area can add lead time, so booking contractors early in the season helps secure availability.

Labor Costs for Concrete Work

Cement masons and concrete finishers earn a national average of $28.33 per hour, or approximately $58,928 annually. Roosevelt County's labor market aligns with these national figures, meaning your concrete project costs won't carry a significant premium or discount based on local wages. The services adjustment factor of 1x reflects this parity: 40% of your project cost covers materials (priced similarly across regions), while 60% covers labor at rates matching the broader market. For a typical 400 sq ft driveway requiring 2-3 days of work, labor accounts for roughly $1,500 to $2,500 of the total cost. Concrete work is physically demanding and requires specialized finishing skills, so hiring experienced professionals ensures proper grading, reinforcement placement, and surface finishing that prevents premature cracking.

Weather Hazards Affecting Concrete

Roosevelt County's most significant hazard for concrete installations is winter weather, scoring 90.77 out of 100 on FEMA's National Risk Index (Relatively High category). Freeze-thaw cycles stress concrete surfaces, making proper air entrainment and curing essential for longevity. The county also faces moderate hail risk (57.63) and wildfire exposure (72.84), though these have less direct impact on concrete structures. Flood risk remains very low at 26.62, reducing concerns about water damage to fresh pours. When planning concrete work, budget for a quality sealer application ($0.50-$1.50 per sq ft) to protect against salt damage and moisture penetration during the long winters. Contractors familiar with northern Montana conditions know to specify 4,000+ PSI concrete mixes that withstand repeated freezing.

Climate Considerations for Concrete

Roosevelt County sits in IECC climate zone 6B, characterized by cold, dry conditions that directly impact concrete work. The county records 7,498 heating degree-days annually, roughly 103% higher than the national median of 3,700 HDD. This translates to a short construction season and specific material requirements. With only 434 cooling degree-days (very low tier), summer heat stress on curing concrete is minimal. Average annual temperatures hover around 44.5°F with modest precipitation at 13.1 inches yearly and 37 inches of snow. For homeowners, this climate means insisting on proper cold-weather concrete specifications: higher cement content, heated water for mixing during shoulder seasons, and insulated blankets for curing. Concrete poured in October faces real risk of freeze damage before reaching full strength, so late-season projects require extra precautions or should wait until spring.

Energy and Curing Considerations

Montana's residential electricity rate of $0.133 per kWh (as of February 2026) affects concrete projects primarily during cold-weather pours requiring heated enclosures. Propane heaters or electric blankets used to maintain curing temperatures can add $100-$300 to project costs depending on duration and weather conditions. For heated concrete applications like radiant floor systems in garages or workshops, Roosevelt County's heating-dominated climate (7,498 HDD) makes these investments worthwhile. A radiant-heated concrete slab adds $6-$10 per sq ft but can reduce long-term heating costs. The county's solar potential (4.77 peak sun hours daily, 8,257 kWh annual production from a 6kW system) offers future offset possibilities for electrically-heated concrete structures, though payback periods extend longer than in sunnier regions.

Financing Your Concrete Project

With median home values at $119,400 in Roosevelt County, a $4,800 concrete driveway represents roughly 4% of home value. This proportion supports using home equity financing for larger concrete projects. Current 30-year mortgage rates sit at 6.36% (as of May 14, 2026), making home equity lines of credit a viable option for projects exceeding $5,000. Many concrete contractors offer payment plans for qualified customers, splitting costs across 3-6 monthly installments. For projects under $3,000, personal savings or 0% promotional credit cards often make more financial sense than secured borrowing. The county's low cost-of-living tier (0.69x national average for housing) means homeowners retain more discretionary income for property improvements. Concrete work adds lasting value: a properly installed driveway typically lasts 25-30 years with basic maintenance, making the per-year cost surprisingly affordable.

Move on this

Compare Concrete quotes in Roosevelt County, MT.

Tell us about your project — we'll match you with up to three licensed, insured pros nearby. Usually within 24 hours.

Get Free Quotes Free · No obligation

Find Local Concrete Providers Near You

Enter your ZIP to see rated concrete pros serving your area.

ZIP code

FREQUENTLY ASKED · 07

Questions buyers ask about concrete in Roosevelt County.

Short answers to the most common things we hear about local pricing, scope, and timing.

What is the best time of year to pour concrete in Roosevelt County?

Late May through September offers the most reliable conditions. With 7,498 heating degree-days annually (more than double the national median), Roosevelt County experiences extended cold periods that can damage curing concrete. Temperatures need to stay above 50°F for at least 7 days after pouring for proper strength development.
How much does a concrete driveway cost in Roosevelt County?

A standard 400 sq ft concrete driveway costs between $3,500 and $6,500, with $4,800 being typical. This reflects national average pricing since local cement mason wages ($28.33/hr) align with national rates. Stamped or colored finishes push costs toward the higher end.
Why does winter weather matter for concrete projects?

Roosevelt County scores 90.77 out of 100 on FEMA's winter weather risk index, placing it in the Relatively High category. Freeze-thaw cycles cause concrete to crack and spall if not properly mixed with air entrainment and sealed after curing. Contractors should specify 4,000+ PSI concrete mixes designed for cold climates.
How much should I budget for a concrete patio?

A 400 sq ft patio slab costs $3,000 to $6,000 in Roosevelt County, with an average around $4,200. Add $200-$600 for a quality sealer application to protect against moisture penetration during the county's harsh winters with 37 inches of annual snowfall.
Do local labor costs affect concrete pricing here?

Roosevelt County's concrete costs match national averages because local cement mason wages ($28.33/hr) equal the national mean. The services adjustment factor is 1x, meaning neither labor premiums nor discounts significantly affect your final price compared to other regions.
Is radiant heating worth adding to a concrete slab?

In Roosevelt County's heating-dominated climate with 7,498 HDD annually, radiant floor heating adds $6-$10 per sq ft but provides meaningful comfort benefits in garages and workshops. At $0.133/kWh electricity rates, operating costs remain reasonable, and the system can offset heating expenses over time.
How can I finance a larger concrete project?

With median home values at $119,400 and current mortgage rates at 6.36%, home equity financing works well for projects exceeding $5,000. A $4,800 driveway represents about 4% of median home value. Many contractors also offer 3-6 month payment plans for qualified customers.

SOURCES · 08

How these numbers were built.

Cost estimates are derived from government data including the U.S. Census Bureau (ACS), Bureau of Labor Statistics (OEWS), FEMA National Risk Index, EIA energy data, IECC climate zone classifications, Federal Reserve (FRED), and HUD Fair Market Rents.