How much does a concrete driveway cost in Travis County, TX?

A typical 400-square-foot concrete driveway costs between $3,115 and $5,785 in Travis County, with an average of $4,270. This reflects a 0.89x local adjustment to national averages, driven by the local cement mason wage of $23.53/hr versus the national average of $28.63/hr.

Why is concrete work slightly cheaper in Travis County than the national average?

Local cement masons and concrete finishers earn an average of $23.53/hr compared to the national average of $28.63/hr. Since labor accounts for roughly 60% of project cost, this results in a 0.89x services adjustment, bringing total project costs about 11% below national averages.

What natural hazards should I consider for my concrete project in Travis County?

Travis County has a FEMA National Risk Index score of 97.74 (Relatively High). Tornado risk is 99.68, hail is 99.40, and inland flooding is 98.35 — all significant threats. Proper reinforcement, sealing, and drainage planning are critical for long-lasting concrete installations in this area.

When is the best time to pour concrete in Travis County?

Travis County is in IECC Climate Zone 2A (hot-humid). The best conditions for pouring are typically spring and fall when temperatures are moderate. During summer, contractors often pour in early morning or evening to avoid excessive heat that accelerates moisture loss and causes cracking.

How much does a concrete patio cost in Travis County?

A 400-square-foot patio slab typically costs between $2,670 and $5,340, with an average of $3,740. This is derived from the national typical cost of $4,200 multiplied by the 0.89x local services adjustment factor.

Can I finance a concrete project in Travis County?

Yes. With the current 30-year fixed mortgage rate at 6.38%, a HELOC is one option. Given the median home value of $487,600 in Travis County, many homeowners have sufficient equity. For larger combined projects exceeding $9,000, financing can spread costs over time while keeping monthly payments manageable.

How many concrete contractors are available in the Travis County area?

The Austin-Round Rock-Georgetown metro area employs approximately 2,390 cement masons and concrete finishers according to 2024 BLS data. This healthy labor pool means homeowners can typically obtain multiple competitive bids for their projects.

REGIONAL COST GUIDE · Travis County, TX

How Much Does Concrete Work Cost in Travis County, TX?

A typical concrete driveway in Travis County, TX costs around $4,270. Compare local prices for driveways, patios, and sidewalks with 2026 data.

Cost range $3,115 – $5,785

Average $4,270

Updated April 13, 2026

Compare Free Concrete Quotes

COST BREAKDOWN

What homeowners in Travis County actually pay.

Local market ranges built from regional labor, materials, and permitting data — not national averages.

Concrete Driveway (400 sq ft)

$3,115 Avg: $4,270 $5,785

Patio Slab (400 sq ft)

$2,670 Avg: $3,740 $5,340

Sidewalk Section (50 linear ft)

$710 Avg: $1,070 $1,600

National avg $4,800 × 0.89x local adjustment = $4,270

Why Travis County prices look like this.

Travis County homeowners considering concrete work — driveways, patios, or sidewalks — can expect costs that run slightly below national averages. With a services adjustment factor of 0.89x, local labor rates bring project totals down modestly compared to the U.S. baseline. A standard 400-square-foot concrete driveway typically costs around $4,270, while a patio slab of the same size averages $3,740. A 50-linear-foot sidewalk section runs about $1,070. Travis County sits in a high-cost housing market, with median home values at $487,600 — roughly 2.83x the national average. That elevated property-value context means concrete improvements can deliver strong returns relative to project cost. With 2,390 cement masons and concrete finishers employed across the Austin-Round Rock-Georgetown metro area, the local market has a solid base of qualified contractors to choose from when collecting quotes.

Labor Costs for Concrete Work in Travis County

Cement masons and concrete finishers in the Austin-Round Rock-Georgetown, TX metro area earn an average hourly wage of $23.53 and an annual mean salary of $48,940, according to 2024 Bureau of Labor Statistics data. This is below the national average of $28.63/hr for the same occupation, which is the primary driver behind the 0.89x services adjustment applied to local project costs. The local workforce includes approximately 2,390 employed cement masons and concrete finishers across the metro area. This relatively healthy labor pool means homeowners should be able to obtain multiple competitive bids without extended wait times. However, demand for concrete work tends to spike during spring and fall when temperatures are moderate, so scheduling during off-peak months may yield better availability and pricing. When evaluating quotes, verify that labor is itemized separately from materials so you can compare contractor rates directly against the local wage benchmark.

Natural Hazard Risks Affecting Concrete in Travis County

Travis County carries a FEMA National Risk Index score of 97.74 (Relatively High), meaning natural hazards pose a significant concern for concrete installations. The most critical risks are tornado (99.68, Very High) and hail (99.40, Very High), both of which can damage exposed concrete surfaces and above-grade structures. Inland flooding scores 98.35 (Relatively High), making proper drainage, grading, and reinforcement essential for driveways and patios to prevent washout and undermining. Lightning risk is 93.29 (Relatively High), and while it does not directly threaten cured concrete, it can disrupt active pours and finishing work. Wildfire risk at 90.84 (Relatively Moderate) and ice storms at 82.91 (Relatively High) add further considerations — extreme heat can cause surface spalling, while freeze-thaw cycles from winter weather (80.43, Relatively Moderate) may crack improperly sealed slabs. Homeowners should discuss sealing, reinforcement, and drainage strategies with their contractor to address these local hazards.

Climate Considerations for Concrete in Travis County

Travis County falls within IECC Climate Zone 2A, characterized by a hot-humid moisture regime. This classification places the region in the DOE Southeast HVAC region, where high summer temperatures and significant humidity are the norm. These conditions directly affect concrete work in several important ways. During hot weather, freshly poured concrete can lose moisture too quickly, leading to surface cracking, reduced strength, and poor curing outcomes. Contractors in Zone 2A typically schedule pours for early morning or late evening during summer months and may use evaporation retarders or wet-curing blankets to maintain proper hydration. The humid conditions (moisture regime A) can help slow surface drying but also mean longer finishing windows and potential issues with moisture-sensitive coatings and sealers. For homeowners, the practical takeaway is that timing matters. Concrete poured under controlled temperature conditions will last longer and perform better, so discuss scheduling and curing strategies with your contractor.

Energy Costs and Their Impact on Concrete Pricing

Electricity plays a role in concrete production, from powering batch plants and mixing equipment to running saws and finishing tools on the job site. In Texas, the residential electricity rate as of January 2026 is $0.157 per kWh. While commercial and industrial rates may differ, the residential rate provides a useful benchmark for understanding local energy costs. Texas operates a partially deregulated electricity market, meaning rates can fluctuate based on provider, plan type, and seasonal demand. Summer months often bring higher electricity costs due to air conditioning load on the grid, which can indirectly affect concrete supplier operating costs. For homeowners planning large pours, these energy inputs are already factored into the per-yard price quoted by ready-mix suppliers. However, sustained increases in energy costs can push material delivery charges higher over time. Monitoring energy price trends can help you time larger concrete projects for periods of more favorable pricing.

Financing Concrete Projects in Travis County

With the 30-year fixed mortgage rate at 6.38% as of March 26, 2026, homeowners considering a home equity loan or HELOC to finance concrete work should factor in current borrowing costs. On a Travis County home at the median value of $487,600, many homeowners have substantial equity available to tap for improvement projects. A typical concrete driveway at $4,270 is modest enough that many homeowners can pay out of pocket, but larger projects combining a driveway, patio, and walkways can quickly exceed $9,000. Median property taxes in the county run $7,487/year, so the additional monthly burden of a financed concrete project is relatively manageable in context. Some contractors offer payment plans or accept home improvement credit cards, which may carry higher rates than a HELOC. Always compare the total cost of financing across options before committing, and verify whether the improvement will be reflected in your property's assessed value.

Move on this

Compare Concrete quotes in Travis County, TX.

Tell us about your project — we'll match you with up to three licensed, insured pros nearby. Usually within 24 hours.

Get Free Quotes Free · No obligation

Find Local Concrete Providers Near You

Enter your ZIP to see rated concrete pros serving your area.

ZIP code

FREQUENTLY ASKED · 07

Questions buyers ask about concrete in Travis County.

Short answers to the most common things we hear about local pricing, scope, and timing.

How much does a concrete driveway cost in Travis County, TX?

A typical 400-square-foot concrete driveway costs between $3,115 and $5,785 in Travis County, with an average of $4,270. This reflects a 0.89x local adjustment to national averages, driven by the local cement mason wage of $23.53/hr versus the national average of $28.63/hr.
Why is concrete work slightly cheaper in Travis County than the national average?

Local cement masons and concrete finishers earn an average of $23.53/hr compared to the national average of $28.63/hr. Since labor accounts for roughly 60% of project cost, this results in a 0.89x services adjustment, bringing total project costs about 11% below national averages.
What natural hazards should I consider for my concrete project in Travis County?

Travis County has a FEMA National Risk Index score of 97.74 (Relatively High). Tornado risk is 99.68, hail is 99.40, and inland flooding is 98.35 — all significant threats. Proper reinforcement, sealing, and drainage planning are critical for long-lasting concrete installations in this area.
When is the best time to pour concrete in Travis County?

Travis County is in IECC Climate Zone 2A (hot-humid). The best conditions for pouring are typically spring and fall when temperatures are moderate. During summer, contractors often pour in early morning or evening to avoid excessive heat that accelerates moisture loss and causes cracking.
How much does a concrete patio cost in Travis County?

A 400-square-foot patio slab typically costs between $2,670 and $5,340, with an average of $3,740. This is derived from the national typical cost of $4,200 multiplied by the 0.89x local services adjustment factor.
Can I finance a concrete project in Travis County?

Yes. With the current 30-year fixed mortgage rate at 6.38%, a HELOC is one option. Given the median home value of $487,600 in Travis County, many homeowners have sufficient equity. For larger combined projects exceeding $9,000, financing can spread costs over time while keeping monthly payments manageable.
How many concrete contractors are available in the Travis County area?

The Austin-Round Rock-Georgetown metro area employs approximately 2,390 cement masons and concrete finishers according to 2024 BLS data. This healthy labor pool means homeowners can typically obtain multiple competitive bids for their projects.

SOURCES · 08

How these numbers were built.

Cost estimates are derived from government data including the U.S. Census Bureau (ACS), Bureau of Labor Statistics (OEWS), FEMA National Risk Index, EIA energy data, IECC climate zone classifications, Federal Reserve (FRED), and HUD Fair Market Rents.