How much does a standing seam metal roof cost in Big Horn County?

Standing seam metal roofs in Big Horn County range from $15,000 to $30,000, with an average cost of $22,000. This reflects the 1x local services adjustment applied to national pricing.

Is corrugated metal roofing cheaper than standing seam?

Yes, corrugated metal roofing costs $10,000 to $20,000 (average $14,000) compared to $15,000 to $30,000 for standing seam. Corrugated panels use exposed fasteners and simpler installation methods, reducing both material and labor expenses.

How does Big Horn County's climate affect metal roof performance?

Big Horn County's 7,498 annual heating degree-days (103% above the national median of 3,700) make metal roofs advantageous because they shed snow efficiently and resist ice dam formation. The area's minimal cooling demand of 434 CDD means reflective coatings provide limited summer benefit.

Are metal roofs safe in areas with high lightning risk?

Yes. Despite Big Horn County's lightning risk score of 83.24 (Relatively High), metal roofs do not attract lightning and are non-combustible if struck. A properly grounded metal roof can actually be safer than combustible roofing materials during electrical storms.

What is the wildfire risk for homes in Big Horn County?

Big Horn County has a wildfire risk score of 94.85 (Relatively Moderate). Metal roofs carry a Class A fire rating, the highest available, making them an excellent choice for fire-resistant construction in this area.

How much does metal roof repair cost?

Metal roof repairs in Big Horn County range from $400 to $2,000, with an average cost of $1,000. Repairs commonly address loose fasteners, sealant failures around penetrations, or minor panel damage from debris.

Can I install solar panels on a metal roof?

Metal roofs provide an ideal base for solar installation. Big Horn County receives 4.75 peak sun hours daily, allowing a 6kW system to generate approximately 8,020 kWh annually. At the local rate of $0.133/kWh, this translates to roughly $1,067 in annual electricity savings.

REGIONAL COST GUIDE · Big Horn County, MT

How Much Does Metal Roofing Cost in Big Horn County, MT?

Metal roofing in Big Horn County, MT costs $14,000-$22,000 on average. Get local pricing for standing seam and corrugated installations.

Cost range $15,000 – $30,000

Average $22,000

Updated May 17, 2026

Compare Free Metal Roofing Quotes

COST BREAKDOWN

What homeowners in Big Horn County actually pay.

Local market ranges built from regional labor, materials, and permitting data — not national averages.

Standing Seam Metal Roof (full replacement)

$15,000 Avg: $22,000 $30,000

Corrugated Metal Roof (full replacement)

$10,000 Avg: $14,000 $20,000

Metal Roof Repair

$400 Avg: $1,000 $2,000

National avg $22,000 × 1x local adjustment = $22,000

Why Big Horn County prices look like this.

Compared to the national average, Big Horn County homeowners benefit from costs that align closely with standard pricing, with a services adjustment factor of 1x. A full metal roof replacement here runs between $10,000 and $30,000 depending on materials and roof complexity. The median home value of $148,200 means a new standing seam roof represents roughly 10-15% of property value. Metal roofing has gained popularity in this region due to its 40-70 year lifespan and strong performance against the area's harsh winters and elevated wildfire risk. Whether you choose standing seam panels for a modern aesthetic or corrugated metal for budget efficiency, both options deliver excellent durability in Montana's demanding climate.

Labor Costs and Contractor Availability

Metal roofing installation requires specialized skills that command premium wages. The national average hourly wage for roofers stands at $27.45/hr (annual mean of $57,085), which applies to this area since county-specific wage data is not available. Labor accounts for roughly 40-50% of total project cost, with the remaining portion covering materials, permits, and equipment. Big Horn County's rural location may affect contractor availability, so homeowners should request quotes from multiple installers and expect longer scheduling windows during peak summer months. Standing seam installations require more precision and take longer than corrugated panels, which contributes to their higher price point.

Weather Hazards and Roof Durability

Big Horn County faces several weather hazards that make metal roofing a practical choice. The area scores 94.85 for wildfire risk (Relatively Moderate) and 88.48 for winter weather (Relatively High), both of which metal roofs handle well due to their Class A fire rating and snow-shedding capabilities. Lightning risk scores 83.24 (Relatively High), though properly grounded metal roofs do not increase strike probability and can actually dissipate energy more safely than other materials. Hail risk is 51.84 (Relatively Low), and quality metal panels with adequate gauge thickness resist denting from moderate hailstones. Tornado and ice storm risks remain Very Low at 12.05 and 12.50 respectively.

Climate Considerations for Metal Roofing

Big Horn County sits in IECC climate zone 6B, a cold and dry region where heating demands dominate energy budgets. With 7,498 heating degree-days annually, homes here run furnaces roughly 103% more than the national median of 3,700 HDD. Cooling demand is minimal at just 434 CDD. This heating-dominated climate makes proper roof insulation and ventilation essential. Metal roofs excel here because they prevent ice dam formation better than asphalt shingles and shed snow loads efficiently. Homeowners should specify adequate attic insulation (R-49 or higher per zone 6 recommendations) beneath any metal roof installation to maximize energy savings during the long heating season.

Energy Efficiency and Utility Savings

Montana's residential electricity rate of $0.133/kWh sits below the national average, though heating costs still represent a significant expense given the 7,498 HDD climate. Metal roofs with reflective coatings can reduce cooling loads during brief summer heat, but the primary energy benefit in Big Horn County comes from preventing heat loss. Cool metal roofing combined with proper insulation keeps heating costs predictable. For homeowners considering future solar panels, metal roofs provide an ideal mounting surface with 40+ year lifespans that outlast most PV systems. The area receives 4.75 peak sun hours daily, meaning a 6kW system could generate approximately 8,020 kWh annually to offset utility costs.

Financing Your Metal Roof

With current 30-year mortgage rates at 6.36%, many homeowners explore home equity options to finance metal roofing projects. A $22,000 standing seam installation on a home valued at $148,200 represents a significant but recoverable investment, as metal roofs add resale value and eliminate replacement costs for decades. Big Horn County's cost multiplier of 0.86x relative to national home values means properties here offer more affordable entry points for major upgrades. Local lenders may offer home improvement loans, while some metal roofing manufacturers provide financing programs with promotional rates. Property taxes averaging $1,482/year leave room in most budgets for reasonable monthly payments on a roof upgrade.

Move on this

Compare Metal Roofing quotes in Big Horn County, MT.

Tell us about your project — we'll match you with up to three licensed, insured pros nearby. Usually within 24 hours.

Get Free Quotes Free · No obligation

Find Local Metal Roofing Providers Near You

Enter your ZIP to see rated metal roofing pros serving your area.

ZIP code

FREQUENTLY ASKED · 07

Questions buyers ask about metal roofing in Big Horn County.

Short answers to the most common things we hear about local pricing, scope, and timing.

How much does a standing seam metal roof cost in Big Horn County?

Standing seam metal roofs in Big Horn County range from $15,000 to $30,000, with an average cost of $22,000. This reflects the 1x local services adjustment applied to national pricing.
Is corrugated metal roofing cheaper than standing seam?

Yes, corrugated metal roofing costs $10,000 to $20,000 (average $14,000) compared to $15,000 to $30,000 for standing seam. Corrugated panels use exposed fasteners and simpler installation methods, reducing both material and labor expenses.
How does Big Horn County's climate affect metal roof performance?

Big Horn County's 7,498 annual heating degree-days (103% above the national median of 3,700) make metal roofs advantageous because they shed snow efficiently and resist ice dam formation. The area's minimal cooling demand of 434 CDD means reflective coatings provide limited summer benefit.
Are metal roofs safe in areas with high lightning risk?

Yes. Despite Big Horn County's lightning risk score of 83.24 (Relatively High), metal roofs do not attract lightning and are non-combustible if struck. A properly grounded metal roof can actually be safer than combustible roofing materials during electrical storms.
What is the wildfire risk for homes in Big Horn County?

Big Horn County has a wildfire risk score of 94.85 (Relatively Moderate). Metal roofs carry a Class A fire rating, the highest available, making them an excellent choice for fire-resistant construction in this area.
How much does metal roof repair cost?

Metal roof repairs in Big Horn County range from $400 to $2,000, with an average cost of $1,000. Repairs commonly address loose fasteners, sealant failures around penetrations, or minor panel damage from debris.
Can I install solar panels on a metal roof?

Metal roofs provide an ideal base for solar installation. Big Horn County receives 4.75 peak sun hours daily, allowing a 6kW system to generate approximately 8,020 kWh annually. At the local rate of $0.133/kWh, this translates to roughly $1,067 in annual electricity savings.

SOURCES · 08

How these numbers were built.

Cost estimates are derived from government data including the U.S. Census Bureau (ACS), Bureau of Labor Statistics (OEWS), FEMA National Risk Index, EIA energy data, IECC climate zone classifications, Federal Reserve (FRED), and HUD Fair Market Rents.