How much does a standing seam metal roof cost in Dallas County, TX?

A standing seam metal roof in Dallas County averages **$20,020** for a full replacement, with costs ranging from **$13,650 to $27,300**. These figures reflect a 0.91x local adjustment based on area roofer wages of $23.41/hr, which run below the national average of $27.75/hr.

Is corrugated metal roofing cheaper than standing seam in Dallas County?

Yes, corrugated metal roofing is significantly less expensive. It averages **$12,740** locally compared to **$20,020** for standing seam, with a full range of **$9,100 to $18,200**. Both figures reflect the 0.91x local cost adjustment applied to national averages.

How much does a metal roof repair cost in Dallas County?

Metal roof repairs in Dallas County average **$910**, with costs ranging from **$365 to $1,820** depending on the extent of damage. These local estimates are derived from national averages adjusted by the 0.91x services factor.

Why is metal roofing important given Dallas County's weather risks?

Dallas County has a FEMA National Risk Index composite score of **99.65 out of 100** (Very High). Hail risk is rated **100.00**, tornado at **99.84**, and ice storm at **99.67**. Metal roofing provides superior impact and wind resistance compared to conventional materials, which is critical in this extreme hazard environment.

How do Dallas County roofer wages compare to the national average?

Roofers in the Dallas-Fort Worth-Arlington metro earn an average of **$23.41/hr** ($48,680/year), approximately 16% below the national average of $27.75/hr. The metro employs about **2,360 roofers**, creating a competitive labor market that contributes to the area's 0.91x cost adjustment.

What climate zone is Dallas County in and how does it affect metal roofing?

Dallas County is in **IECC Climate Zone 3A** (warm-humid), classified under the DOE's Southeast HVAC region. With Texas residential electricity at **$0.157/kWh**, a reflective metal roof can reduce cooling costs by limiting solar heat absorption—an important benefit in this cooling-dominated climate.

What are current financing rates for a metal roof in Dallas County?

As of March 2026, the 30-year fixed mortgage rate is **6.38%**, which serves as a benchmark for home equity and improvement loans. With the county's median home value at **$277,900**, many homeowners have sufficient equity to finance a standing seam roof averaging $20,020 or a corrugated roof at $12,740.

REGIONAL COST GUIDE · Dallas County, TX

How Much Does Metal Roofing Cost in Dallas County, TX?

Metal roofing in Dallas County, TX averages $12,740–$20,020. Compare standing seam, corrugated, and repair costs with 2026 local labor and material data.

Cost range $13,650 – $27,300

Average $20,020

Updated April 12, 2026

Compare Free Metal Roofing Quotes

COST BREAKDOWN

What homeowners in Dallas County actually pay.

Local market ranges built from regional labor, materials, and permitting data — not national averages.

Standing Seam Metal Roof (full replacement)

$13,650 Avg: $20,020 $27,300

Corrugated Metal Roof (full replacement)

$9,100 Avg: $12,740 $18,200

Metal Roof Repair

$365 Avg: $910 $1,820

National avg $22,000 × 0.91x local adjustment = $20,020

Why Dallas County prices look like this.

Dallas County homeowners considering a metal roof can expect to pay between $9,100 and $27,300 depending on the material and scope of the project. Local metal roofing costs run approximately 9% below national averages, driven by roofer wages in the Dallas-Fort Worth-Arlington metro area averaging $23.41/hr compared to the national mean of $27.75/hr. With a median home value of $277,900 across the county's 84 ZIP codes, a metal roof replacement represents a significant but value-adding investment. A standing seam installation averages $20,020 locally, while corrugated metal roofing comes in around $12,740. Minor repairs average just $910. Dallas County's extreme weather profile—including very high hail, tornado, and ice storm risk—makes durable roofing materials especially relevant for long-term protection and reduced maintenance costs.

Roofer Labor Costs in Dallas-Fort Worth

Roofers in the Dallas-Fort Worth-Arlington metropolitan area earn an average of $23.41 per hour, or $48,680 annually, according to 2024 Bureau of Labor Statistics occupational data. The metro employs approximately 2,360 roofers, providing a competitive labor market that helps keep installation costs manageable. Local wages run about 16% below the national average of $27.75/hr for roofers (SOC 47-2181), which is the primary driver behind Dallas County's 0.91x cost adjustment factor. The adjustment formula weights 40% for materials pass-through and 60% for the local-to-national wage ratio ($23.41 ÷ $27.75). Labor typically represents a substantial share of any metal roofing project, meaning this wage differential translates into real savings on full replacements. When evaluating contractor quotes, homeowners should verify that labor rates align with these local benchmarks. A bid significantly above or below the area's prevailing wage may warrant additional scrutiny regarding crew experience or project scope.

Severe Weather and Hazard Risk in Dallas County

Dallas County carries a 99.65 out of 100 composite hazard risk score from FEMA's National Risk Index, placing it firmly in the Very High category. The county's most severe threats include hail at 100.00, tornado at 99.84, ice storm at 99.67, inland flooding at 99.55, winter weather at 98.66, and lightning at 98.06—all rated Very High. Hurricane risk registers at 73.55 and wildfire at 80.28, both rated Relatively Low for this region. This extreme hazard profile makes roofing material choice critical. Metal roofs offer superior impact resistance compared to traditional asphalt shingles, an important consideration given Dallas County's nation-leading hail score of 100.00. Homeowners should ask contractors about impact-rated panels and ensure warranties explicitly cover hail and wind damage. Insurers increasingly factor roof material and rating into premium calculations, and a metal roof may qualify for meaningful insurance discounts in this very high-risk county.

Climate Zone Considerations for Metal Roofing

Dallas County falls within IECC Climate Zone 3A, characterized by a warm-humid moisture regime. The DOE classifies this area under the Southeast HVAC region. Zone 3 locations experience hot summers and mild winters, which directly influences roofing material performance and energy efficiency requirements. Metal roofs with reflective coatings are well suited for this climate because they redirect solar radiation rather than absorbing it, reducing heat transfer into the home. Standing seam panels with cool-roof finishes are particularly appropriate for Zone 3A, where cooling demand dominates annual energy use. When selecting a metal roof color and finish, homeowners should prioritize solar reflectance index ratings to maximize comfort and energy performance. Contractors experienced with Dallas County's climate zone can also recommend appropriate underlayment and ventilation strategies to manage moisture challenges inherent to the humid subtropical environment that defines moisture regime A.

Electricity Costs and Metal Roof Energy Performance

Texas residential electricity averaged $0.157 per kWh as of January 2026, making energy efficiency a practical factor in roofing decisions. In Dallas County's hot, humid climate (Zone 3A), air conditioning represents a major share of household electricity consumption. A metal roof with a reflective or cool-roof rated finish can meaningfully reduce cooling loads by limiting heat absorption through the roof deck. These savings compound over the decades-long lifespan typical of metal roofing systems, helping offset the higher upfront cost compared to asphalt shingles. Homeowners should request energy performance details from contractors and check whether their electricity provider offers rebates for cool-roof installations. When comparing metal roofing quotes, ask whether the proposed panels carry an Energy Star rating or meet cool-roof reflectance standards. Texas's deregulated electricity market means rates vary by provider, but the statewide average of $0.157/kWh provides a useful baseline for evaluating long-term return on investment.

Financing a Metal Roof in Dallas County

The 30-year fixed mortgage rate stood at 6.38% as of March 26, 2026, a relevant benchmark for homeowners considering financing a metal roof through a home equity loan or cash-out refinance. With Dallas County's median home value at $277,900 and median annual property taxes of $4,668, many homeowners have meaningful equity available to leverage for improvement projects. A standing seam metal roof averaging $20,020 or a corrugated roof at $12,740 can be financed through home equity lines of credit, dedicated home improvement loans, or manufacturer financing programs. At current rates, homeowners should carefully compare APRs and repayment terms across lenders. Dallas County sits at 1.61x the national home-value average, suggesting relatively strong property values that may support favorable lending terms. Given the long service life of metal roofing, financing allows homeowners to spread the cost over time while immediately benefiting from improved durability and weather resistance.

Move on this

Compare Metal Roofing quotes in Dallas County, TX.

Tell us about your project — we'll match you with up to three licensed, insured pros nearby. Usually within 24 hours.

Get Free Quotes Free · No obligation

Find Local Metal Roofing Providers Near You

Enter your ZIP to see rated metal roofing pros serving your area.

ZIP code

FREQUENTLY ASKED · 07

Questions buyers ask about metal roofing in Dallas County.

Short answers to the most common things we hear about local pricing, scope, and timing.

How much does a standing seam metal roof cost in Dallas County, TX?

A standing seam metal roof in Dallas County averages **$20,020** for a full replacement, with costs ranging from **$13,650 to $27,300**. These figures reflect a 0.91x local adjustment based on area roofer wages of $23.41/hr, which run below the national average of $27.75/hr.
Is corrugated metal roofing cheaper than standing seam in Dallas County?

Yes, corrugated metal roofing is significantly less expensive. It averages **$12,740** locally compared to **$20,020** for standing seam, with a full range of **$9,100 to $18,200**. Both figures reflect the 0.91x local cost adjustment applied to national averages.
How much does a metal roof repair cost in Dallas County?

Metal roof repairs in Dallas County average **$910**, with costs ranging from **$365 to $1,820** depending on the extent of damage. These local estimates are derived from national averages adjusted by the 0.91x services factor.
Why is metal roofing important given Dallas County's weather risks?

Dallas County has a FEMA National Risk Index composite score of **99.65 out of 100** (Very High). Hail risk is rated **100.00**, tornado at **99.84**, and ice storm at **99.67**. Metal roofing provides superior impact and wind resistance compared to conventional materials, which is critical in this extreme hazard environment.
How do Dallas County roofer wages compare to the national average?

Roofers in the Dallas-Fort Worth-Arlington metro earn an average of **$23.41/hr** ($48,680/year), approximately 16% below the national average of $27.75/hr. The metro employs about **2,360 roofers**, creating a competitive labor market that contributes to the area's 0.91x cost adjustment.
What climate zone is Dallas County in and how does it affect metal roofing?

Dallas County is in **IECC Climate Zone 3A** (warm-humid), classified under the DOE's Southeast HVAC region. With Texas residential electricity at **$0.157/kWh**, a reflective metal roof can reduce cooling costs by limiting solar heat absorption—an important benefit in this cooling-dominated climate.
What are current financing rates for a metal roof in Dallas County?

As of March 2026, the 30-year fixed mortgage rate is **6.38%**, which serves as a benchmark for home equity and improvement loans. With the county's median home value at **$277,900**, many homeowners have sufficient equity to finance a standing seam roof averaging $20,020 or a corrugated roof at $12,740.

SOURCES · 08

How these numbers were built.

Cost estimates are derived from government data including the U.S. Census Bureau (ACS), Bureau of Labor Statistics (OEWS), FEMA National Risk Index, EIA energy data, IECC climate zone classifications, Federal Reserve (FRED), and HUD Fair Market Rents.